CHALMIT/EMERSON

Atex Luminaires

ATEX luminaires are designed for use in explosive atmospheres where oxygen combines with flammable airborne substances and where there is a deflagration risk. The lighting in an ATEX zone has to be highly specific to mitigate the effects of any contingency.
  • Group II Category 2 GD
  • Aluminium alloy LM6 to BS 1490 (AC44100)
  • All fastenings A4 stainless steel
  • Toughened glass dome globe
  • IP66/67
Industrial pendant light with a cast metal housing and glass globe from CHALMIT

238 Wellglass,250W HPS/MH, Z1&Z21

Industrial light fitting with a clear glass globe and a robust grey metal housing

261 Wellglass, 250W HPS, Z1&Z2

Industrial light fitting with a white enclosure, perforated metal diffuser and projecting side mounting rails

Acclaim III 2 x 18W Z1&Z21

Industrial light fitting with a perforated metal grille, white enclosure and projecting mounting rails

Acclaim III 2 x 18W Z1&Z21 EM

Rectangular industrial unit with a perforated metal grille, cable entries and projecting metal mounting rails

ACCLAIM III 2 X 36W ZONE 1 RECESSED

Industrial luminaire with a perforated metal grille, white housing, visible fasteners and metal mounting rails

ACCLAIM III 2 X 36W EMERGENCY FITTING

Industrial LED floodlight with three LED panels, a rugged grey enclosure and adjustable mounting bracket

Arran LED Floodlight, Z2,22,21

Industrial LED floodlight with three LED arrays, rugged metal enclosure and adjustable mounting bracket

Arran floodlight, 70W LED, Z2, 22 & 21

Industrial LED floodlight with three LED panels, a rugged grey housing and an adjustable metal mounting bracket

Arran floodlight, 85W LED, Z2, 22 & 21

Industrial LED floodlight with three LED boards in a rugged metal enclosure and adjustable mounting bracket

Arran floodlight 125W LED, Z2, 22 & 21

Rectangular industrial ceiling light with a metal housing, broad diffused lens and visible fixing points

Curie Elite 2 x 18W Z1&Z21

Industrial rectangular ceiling light with a white frame, broad translucent diffuser and grey metal housing

Curie Elite 2 x 18W Z1&Z21 EM

Rectangular industrial light fitting with a broad frosted diffuser, white frame and grey metal housing

Curie Elite 2 x 36W Z1&Z21

Industrial light fitting with a rectangular diffused panel, white bezel and metal mounting housing

Curie Elite 2 x 36W Z1&Z21 EM

Industrial rectangular ceiling light with a broad frosted diffuser, white bezel and grey metal housing.

Curie Elite 4 x 18W Z1&Z21

Rectangular industrial luminaire with a white frame, textured diffuser and grey metal housing

Curie Elite 4 x 18W Z1&Z21 EM

Rectangular surface mounted light fitting with a broad white frame, recessed diffuser panel and metal mounting housing

Curie Elite 4 x 36W Z1&Z21

Industrial fluorescent light fitting with twin tubes, metal housing, mounting rail and cable connection

Lomond 2 x 18W, Z1&21

Industrial twin-tube fluorescent light fitting with a metal housing, mounting rail and cable connection

Lomond 2 x 18 EM, Z1&21

Industrial fluorescent light fitting with twin linear tubes, a metal housing, cable connection and mounting rail

Lomond 2 x 36W, Z1&Z21

Industrial fluorescent light fitting with twin linear tubes, metal housing, mounting rail and cable connector

Lomond 2 x 58W, Z1&Z21

Industrial fluorescent light fitting with twin tubular lamps, metal protective housing, mounting rail and cable connector

Lomond 2 x 58W, Z1&Z21 EM

Floodlight with a rectangular glass lens, black ribbed housing and adjustable mounting bracket

Micronex, 70W HPS/MH Z2,22

Industrial LED light fitting with a black housing, clear protective window and internal linear LED array

NEXLED 2 X 1W LED BULKHEAD Z1&21

Industrial LED light fitting with a clear protective cover, metal reflector and rugged black housing with mounting hardware

NEXLED 2 x 1W LED ATEX EM

Industrial LED light fixture in a rugged black enclosure, with a clear protective cover and a reflective metal interior.

Nexled 4W bulhead GDE

Industrial LED luminaire in a black housing with a clear protective cover and a visible LED strip

Nexled 15W bulkhead

Industrial LED luminaire with a green illuminated panel and two bright light points in a rugged black rectangular housing

Nexled 8 x 1W, Cat 2, Z1&21 EM Green

Industrial oval light fitting with a metal housing, clear protective lens and visible internal components.

Nevis 50W HPS Z1&Z21

CHALMIT industrial lighting fixture with a rectangular LED array mounted inside a robust oval metal housing

Nevis 52W LED Z1&21

Industrial oval light fitting with a metal housing, protective glass lens and visible internal lamp components.

Nevis 70W Metal Halide Z1&Z21

Industrial oval light fitting with a metal housing, clear glass lens, internal lamps and mounting brackets

Nevis 80W Mercury Vapour Z1&Z21

Industrial oval bulkhead light fitting with a sealed glass lens, metal housing and mounting brackets

Nevis 18W Compact Fluorescent Z1&z21

Oval industrial light fitting with a heavy-duty metal housing, clear protective lens and visible internal lamp components

Nevis 125W Mercury Vapour Z1&Z21

Industrial oval light fitting with a heavy-duty metal housing, sealed glass lens and visible internal lamps.

Nevis 26W Compact Fluorescent Z1&Z21

Industrial oval bulkhead light with a metal housing, protective glass lens and visible internal lamp components.

Nevis 200W GLS Z1&Z21

Linear LED light fixture with two visible LED strips inside a clear protective housing and white mounting base

Protecta 30W LED, Z1&21, 2178lm

Linear LED light fitting with two exposed LED strips inside a clear protective housing and white mounting base

Protecta 30W LED, Z1&21, EM

Industrial LED luminaire with twin light strips, clear protective housing and cable connection

Protecta 60W LED, Z1&21, 4607lm

Industrial LED light fitting with twin LED boards inside a clear protective enclosure and a cable connection

Protecta 60W LED, Z1&Z21, EM

Industrial fluorescent light fitting with two linear tubes, a clear protective cover and sealed metal end caps

Protecta II 2 x 18W Z1&Z21 Em

Industrial fluorescent light fitting with a long sealed housing and two linear tube lamps

Protecta III 1 x 36W Z1&Z21

Linear industrial light fitting with two internal tubes, a long translucent cover and metal end fittings.

Protecta III 2x18W Z1&Z21

Industrial twin-tube fluorescent light fitting in a long protective housing with metal end caps

PROTECTA III 2 X 36W Z1&21

Linear fluorescent light fitting with two tube lamps in a protective housing, supplied by CHALMIT

Protecta III 2 x 36W Z1&Z21 Em

Industrial linear light fitting with a long sealed housing and twin fluorescent tubes from CHALMIT

PROTECTA 2X36 INDUSTRIAL-EM

Industrial fluorescent light fitting with a long rectangular metal housing and two linear lamps, shown at an angle.

PROTECTA 2X36W INDUSTRIAL

Circular industrial light fitting with a metal housing, protective glass lens and adjustable mounting bracket

Solas floodlight 34W LED

Industrial circular LED luminaire with a metal housing, clear lens, visible LED array and adjustable mounting bracket

Solas floodlight 34W LED EM

Industrial circular light fitting with a metal housing, clear lens, visible array of light elements and mounting bracket.

Chalmit Solas EXd Emergency zone1 & 2

Industrial circular LED luminaire with a protective lens, rugged metal housing and adjustable mounting bracket

Solas, 34x1W LED floodlight, Z1&2, EM

Linear light fitting with a long ribbed clear diffuser, white housing and metal fastening clips

Chalmit 1x18w Zone2 em ftg

CHALMIT linear industrial light fitting with a long ribbed clear diffuser and pale housing

FITTING ZONE 2 1X36W

Long industrial batten light fitting with a ribbed clear protective cover and white housing, supplied by CHALMIT

Chalmit Sterling Range Fitting

Industrial linear luminaire by CHALMIT with a long ribbed transparent diffuser and a light-coloured housing

STERLING 1X58W ZONE 2 FITTING

Chalmit industrial linear light fixture with a long ribbed diffuser, protective housing and mounting clips

Sterling II, 2 x 18W, Z2&22

Linear industrial light fitting with a ribbed transparent diffuser, white housing and metal retaining clips

CHALMIT 2X36W ZONE 2 FITTING

Long linear industrial light fitting with a ribbed translucent cover, sealed housing and multiple securing clips

CHALMIT 2X36W ZONE 2 + EM PACK

Linear enclosed light fitting with a ribbed clear diffuser, white housing and metal mounting clips

STERLING II, 2x58W, Z2&22,

Industrial linear light fitting with a long ribbed clear diffuser, white housing and metal retaining clips

STERLING 2, 2 X 58W, ZONE 2, EX, EMERGENCY

Industrial light fixture with a rectangular glass lens, visible tubular lamp, ribbed lower housing and mounting bracket.

FLOODLIGHT ZONE 2 150W

Industrial enclosed floodlight with a clear front lens, internal lamp, black housing and adjustable mounting bracket.

FLOODLIGHT ZONE 2 250W

CHALMIT industrial floodlight with a black rectangular housing, glass front, internal lamp and adjustable mounting bracket

FLOODLIGHT 400W ZONE 2

Industrial LED luminaire in a rugged black housing with a clear protective cover and brushed metal mounting plate.

Nexled 6W LED, Z1 & 21, G2,

Selected variant

Avaible in several variants

Selected variant

Specifications

Accessories

Add product as a new cart row

You already added this product. Choose whether to increase quantity on the existing row or add the product as a new row.

Seifert cooling unit
Blog

F-Gas Regulation & Enclosure Cooling in Ireland

Modular busbar systems that streamline power distribution, improve safety, and speed up panel builds.

jim
Company News

Welcome Jim Murray to OEM Demesne

A familiar face returns. Jim Murray joins OEM-Demesne as Chief Sales & Supplier Officer, bringing 26 years of industry leadership back to the business at a defining moment in the move to OEM Automatic.

katko ksm
Blog

Katko IsoSafe KSM Safety Switch

Katko has launched a significant upgrade to its IsoSafe KSM safety switch range (16–25A), built around the realities of modern installation work. The redesigned side-operated switch combines an

wohner
Blog

Wohner 60 Classic and Crossboard

Modular busbar systems that streamline power distribution, improve safety, and speed up panel builds.

tekox
Blog

Tekox Terminal Strips Safety Blocks and Porcelain Blocks

Great electrical installations don't fail because of the major components. They fail because of the small ones that didn't get enough attention.
It's easy to focus on the big-ticket items during specification — and let the terminal blocks become an afterthought. But inferior connection components have a habit of making themselves known over time. Loose connections, degraded insulation, premature failure. The kind of faults that are frustrating to trace and expensive to fix.
Tekox engineer their terminal strips, safety blocks, insulated strips, and porcelain blocks to the standards your installations deserve. Available now from Demesne Electrical — get in touch and we'll show you the range.

PPVK Series
Blog

Conta-Clip Push-in PPVK Distribution Terminals

Conta-Clip PPVK push-in potential distribution terminals simplify control cabinet wiring with tool-free connections, compact DIN rail mounting, and reliable current distribution up to 41A.

My favourites Articles Price

Selected variant

Select a variant in the list

Customer support
Our customer support team answers all kinds of questions.
+35314047700
Send e-mail
Do you need help?

Please login or continue as a guest

To get the best deals
Login | Create account

You have 0 articles in cart