Sifam Multi Function Energy Meter

Code: ND30-11200U1
843.37

Location Stock
Cork Available to Order
Tallaght Available to Order
Dungannon Available to Order

 

Sifam Tinsley ND30-112001U1

Digital Energy Meter


Product Overview

The ND30 meter is a programmable digital instrument designed for the measurement of 1-phase 2-wire and 3-phase 3 and 4-wire power network parameters in balanced or unbalanced systems. The measured values are displayed on a 3.5″ TFT full-colour screen, resolution: 320 (240 pixels). The meter enables control and optimisation of the power electronic devices, systems and industrial installations. 

The meter provides measurement of: RMS of voltage and current, active, reactive and apparent voltage / up to 51st/, THD of voltage and current, averaged active and apparent power P Demand, S Demand, averaged current I Demand /15, 30 or 60 minutes/. Voltages and currents are multiplied by given voltage and current ratios of the measuring transformers. 

Power and energy indications take into account all programmed ratio values. The value of each measured value can be transmitted to the master system via the RS-485 or Ethernet interface. Three relay outputs signal the overflow of the chosen value and the programmable analogue output maps the assigned parameter. The temperature inputs can be used to control the temperature of the transformers windings, motors.

Sign Up For Product Launches & Updates

Enter your email address here

Thank you for signing up to our mailing list