"Please note: We are currently making updates to our website to improve your experience. Some sections may be temporarily unavailable. Thank you for your patience!"
GELBAU
The sensing strips consist of two layers of rubber, one with conductive and one normal insulating rubber. A copper wire embedded in two separated layers of conductive rubber together with a resistor at the end of the sensing strip, forms a closed circuit. If the separated layers are pressed together there is a short-circuit, the control unit react and its outputs release. In the same set hammer the control unit reacts to an open-circuit in the cable or in the sensing strip's copper conductor. Several sensing strips can be easily connected in series. Up to 100 m of sensing strip can be connected to one control unit.
Ingress protection class | IP67 (factory fitted) |
Ambient temperature | -20 °C to +80 °C |
Cable connection | 2, 5 or 15 m cable with pin connector |
Max. cable length | 50 m |
Max. number of sensing strips | No limit (up to 100 m) |
Material | EPDM or NBR (nitrile) |
Contact voltage (operation) | Approx. 5 V from the control unit |
Contact current (operation) | 0.6 mA |
Min. activation force | 10 N |
Installation | Use our mounting rail |
Safety category | 3 in accordance with EN954-1 with control unit |
Standard | EN1760-2 |
Conforming to | MD, EMC, LVD |
Approvals |
|
Chemical properties | ||
| ||
Liquid | Resistant: |
|
| EPDM | Nitrile |
Water | Excellent | Excellent |
Acids (diluted) | Poor | Good |
Solvents | Poor | Good |
Oils | Poor | Good |
Petrol | Poor | Good |
Ozone | Excellent | Poor |
A complete system consists of the following: | Cable outputs |
|
|
| Indicate the cable output number when ordering factory fitted strips. |
Sensing strips (dimensions in mm)
| ||
Order no. | Description | Material |
3100.0118 | Sensing strip 21 mm, black | EPDM |
3100.0118W | Sensing strip 21 mm, white | EPDM |
3100.0118N | Sensing strip 21 mm, black | Nitrile |
| ||
Order no. | Description | Material |
3100.0110I | Sensing strip 32.5 mm, black | EPDM |
3100.0110RED | Sensing strip 32.5 mm, red | EPDM |
3100.0110Y | Sensing strip 32.5 mm, yellow | EPDM |
3100.0110N | Sensing strip 32.5 mm, black | Nitrile |
| ||
Order no. | Description | Material |
3100.1610 | Sensing strip 51 mm, black | EPDM |
3100.1610N | Sensing strip 51 mm, black | Nitrile |
| ||
Order no. | Description | Material |
3100.0310 | Sensing strip 76 mm, black | EPDM |
| ||
Order no. | Description | Material |
3100.0510 | Sensing strip 32.5 mm with seal | EPDM |
| ||
Order no. | Description | Material |
3100.0804 | Sensing strip 51 mm with seal | EPDM |
| ||
Order no. | Description | Material |
3100.0210 | Sensing strip 76 mm with seal | EPDM |
Installation components
For sensing strip 3100.0118
1. Sensing strip
| ||
Order no. | Description | Material |
3100.0118 | Sensing strip 21 mm, black | EPDM |
3100.0118W | Sensing strip 21 mm, white | EPDM |
3100.0118N | Sensing strip 21 mm, black | Nitrile |
2. End cap
| ||
Order no. | Description | Material |
3050.1318 | End cap (130/18) | EPDM |
3050.1318W | End cap (130/18), white | EPDM |
3050.1318N | End cap (130/18), nitrile | Nitrile |
3. Cable with pin
| |
Order no. | Description |
3020.1183 | Connection cable (118/03), 3 m |
3020.1185 | Connection cable (118/05), 5 m |
4. Resistor with pin
| |
Order no. | Description |
3031.1186 | Resistor (118), 8.2 kOhm |
5.
| |
Order no. | Description |
3045.1219 | Mounting rail (112/A7) Only available in 2000, 4000 mm... |
Installation components
For sensing strips 3100.0110 and 3100.0510
1. Sensing strip
| ||
Order no. | Description | Material |
3100.0110I | Sensing strip 32.5 mm, black | EPDM |
3100.0110RED | Sensing strip 32.5 mm, red | EPDM |
3100.0110Y | Sensing strip 32.5 mm, yellow | EPDM |
3100.0110N | Sensing strip 32.5 mm, black | Nitrile |
2. End cap
| ||
Order no. | Description | Material |
3050.1302 | End cap (130/2) | EPDM |
3050.1302RED | End cap (130/2), red | EPDM |
3050.1302Y | End cap (130/2), yellow | EPDM |
3050.1302N | End cap (130/2N), nitrile | Nitrile |
3. Cable with pin
| |
Order no. | Description |
3020.1300B | Connection cable, 0.35 m |
3020.1301B | Connection cable (130/01), 1m |
3020.1302B | Connection cable (130/02), 2 m |
3020.1305B | Connection cable (130/05), 5 m |
3020.1307B | Connection cable (130/07), 15 m |
4. Resistor with pin
| |
Order no. | Description |
3031.1306B | Resistor 8.2 kΩ (red) |
5. Corner connector
| ||
Order no. | Description | Material |
3050.0071 | Corner connector 90°, horizontal | EPDM |
3050.0071N | Corner connector 90°, horizontal, nitrile | Nitrile |
Other angles/colours on request |
| |
6. Corner connector
| ||
Order no. | Description | Material |
3050.0072 | Corner connector 90°, vertical | EPDM |
3050.0072N | Corner connector 90°, vertical, nitrile | Nitrile |
Other colours on request |
| |
7. Connector
| |
Order no. | Description |
3050.0061 | Straight connector for sensing strip 3100.0110I |
*Some order numbers have the additional designation “N” which means they are made of oil-resistant nitrile. Without this additional designation the material is EPDM.
Installation components
For sensing strips 3100.1610 and 3100.0804
1. Sensing strip
| ||
Order no. | Description | Material |
3100.1610 | Sensing strip 51 mm, black | EPDM |
3100.1610N | Sensing strip 51 mm, black | Nitrile |
3100.0804 | Sensing strip 51 mm with seal | EPDM |
2. End cap
| ||
Order no. | Description | Material |
3050.1303 | End cap (130/3) | EPDM |
3050.1303N | End cap (130/3N), nitrile | Nitrile |
3. Cable with pin
| |
Order no. | Description |
3020.1300B | Connection cable, 0.35 m |
3020.1302B | Connection cable (130/02), 2 m |
3020.1305B | Connection cable (130/05), 5 m |
3020.1307B | Connection cable (130/07), 15 m |
4. Resistor with pin
| |
Order no. | Description |
3031.1306B | Resistor 8.2 kΩ (red) |
5. Corner connector
| |
Order no. | Description |
3050.0074 | Corner connector (h=51 mm) |
For sensing strips 3100.0310 and 3100.0210
6. Sensing strip
| |
Order no. | Description |
3100.0310 | Sensing strip 76 mm, black |
3100.0210 | Sensing strip 76 mm with seal |
7. End cap
| ||
Order no. | Description | Material |
3050.1303 | End cap (130/3) | EPDM |
3050.1303N | End cap (130/3N), nitrile | Nitrile |
8. Cable with pin
| |
Order no. | Description |
3020.1300B | Connection cable, 0.35 m |
3020.1302B | Connection cable (130/02), 2 m |
3020.1305B | Connection cable (130/05), 5 m |
3020.1307B | Connection cable (130/07), 15 m |
9. Resistor with pin
| |
Order no. | Description |
3031.1306B | Resistor 8.2 kΩ (red) |
10. Corner connector
| ||
Order no. | Description | Material |
3050.0073 | Corner connector (h=76 mm) | EPDM |
Mounting rail
11. Installation rail
| |
Order no. | Description |
3045.1213 | Mounting rail (112/A1) Only available in 2000, 4000 mm etc. |
3045.1212 | Mounting rail (112/A) Only available in 2000, 4000 mm etc. |
12. Installation rail
| |
Order no. | Description |
3045.1214 | Mounting rail (112/A2) Only available in 2000, 4000 mm etc. |
13. Installation rail
| |
Order no. | Description |
3045.1215 | Mounting rail (112/A3) Only available in 2000, 4000 mm etc. |
*Some order numbers have the additional designation “N” which means they are made of oil-resistant nitrile. Without this additional designation the material is EPDM
| Approvals | CE, TÜV NORD |
|---|---|
| Conforming To | EMC, LVD, MD |
| Contact Current | 0.6 |
| Contact Voltage | 5 |
| Height | 32 |
| IP Class | IP67 |
| Material | NBR |
| Number Of Terminal Strips Max | 10 |
| Temperature ambient from | -10 |
| Temperature ambient to | 50 |
| Terminal Strip Length Max | 100 m |
The sensing strips consist of two layers of rubber, one with conductive and one normal insulating rubber. A copper wire embedded in two separated layers of conductive rubber together with a resistor at the end of the sensing strip, forms a closed circuit. If the separated layers are pressed together there is a short-circuit, the control unit react and its outputs release. In the same set hammer the control unit reacts to an open-circuit in the cable or in the sensing strip's copper conductor. Several sensing strips can be easily connected in series. Up to 100 m of sensing strip can be connected to one control unit.
Ingress protection class | IP67 (factory fitted) |
Ambient temperature | -20 °C to +80 °C |
Cable connection | 2, 5 or 15 m cable with pin connector |
Max. cable length | 50 m |
Max. number of sensing strips | No limit (up to 100 m) |
Material | EPDM or NBR (nitrile) |
Contact voltage (operation) | Approx. 5 V from the control unit |
Contact current (operation) | 0.6 mA |
Min. activation force | 10 N |
Installation | Use our mounting rail |
Safety category | 3 in accordance with EN954-1 with control unit |
Standard | EN1760-2 |
Conforming to | MD, EMC, LVD |
Approvals |
|
Chemical properties | ||
| ||
Liquid | Resistant: |
|
| EPDM | Nitrile |
Water | Excellent | Excellent |
Acids (diluted) | Poor | Good |
Solvents | Poor | Good |
Oils | Poor | Good |
Petrol | Poor | Good |
Ozone | Excellent | Poor |
A complete system consists of the following: | Cable outputs |
|
|
| Indicate the cable output number when ordering factory fitted strips. |
Sensing strips (dimensions in mm)
| ||
Order no. | Description | Material |
3100.0118 | Sensing strip 21 mm, black | EPDM |
3100.0118W | Sensing strip 21 mm, white | EPDM |
3100.0118N | Sensing strip 21 mm, black | Nitrile |
| ||
Order no. | Description | Material |
3100.0110I | Sensing strip 32.5 mm, black | EPDM |
3100.0110RED | Sensing strip 32.5 mm, red | EPDM |
3100.0110Y | Sensing strip 32.5 mm, yellow | EPDM |
3100.0110N | Sensing strip 32.5 mm, black | Nitrile |
| ||
Order no. | Description | Material |
3100.1610 | Sensing strip 51 mm, black | EPDM |
3100.1610N | Sensing strip 51 mm, black | Nitrile |
| ||
Order no. | Description | Material |
3100.0310 | Sensing strip 76 mm, black | EPDM |
| ||
Order no. | Description | Material |
3100.0510 | Sensing strip 32.5 mm with seal | EPDM |
| ||
Order no. | Description | Material |
3100.0804 | Sensing strip 51 mm with seal | EPDM |
| ||
Order no. | Description | Material |
3100.0210 | Sensing strip 76 mm with seal | EPDM |
Installation components
For sensing strip 3100.0118
1. Sensing strip
| ||
Order no. | Description | Material |
3100.0118 | Sensing strip 21 mm, black | EPDM |
3100.0118W | Sensing strip 21 mm, white | EPDM |
3100.0118N | Sensing strip 21 mm, black | Nitrile |
2. End cap
| ||
Order no. | Description | Material |
3050.1318 | End cap (130/18) | EPDM |
3050.1318W | End cap (130/18), white | EPDM |
3050.1318N | End cap (130/18), nitrile | Nitrile |
3. Cable with pin
| |
Order no. | Description |
3020.1183 | Connection cable (118/03), 3 m |
3020.1185 | Connection cable (118/05), 5 m |
4. Resistor with pin
| |
Order no. | Description |
3031.1186 | Resistor (118), 8.2 kOhm |
5.
| |
Order no. | Description |
3045.1219 | Mounting rail (112/A7) Only available in 2000, 4000 mm... |
Installation components
For sensing strips 3100.0110 and 3100.0510
1. Sensing strip
| ||
Order no. | Description | Material |
3100.0110I | Sensing strip 32.5 mm, black | EPDM |
3100.0110RED | Sensing strip 32.5 mm, red | EPDM |
3100.0110Y | Sensing strip 32.5 mm, yellow | EPDM |
3100.0110N | Sensing strip 32.5 mm, black | Nitrile |
2. End cap
| ||
Order no. | Description | Material |
3050.1302 | End cap (130/2) | EPDM |
3050.1302RED | End cap (130/2), red | EPDM |
3050.1302Y | End cap (130/2), yellow | EPDM |
3050.1302N | End cap (130/2N), nitrile | Nitrile |
3. Cable with pin
| |
Order no. | Description |
3020.1300B | Connection cable, 0.35 m |
3020.1301B | Connection cable (130/01), 1m |
3020.1302B | Connection cable (130/02), 2 m |
3020.1305B | Connection cable (130/05), 5 m |
3020.1307B | Connection cable (130/07), 15 m |
4. Resistor with pin
| |
Order no. | Description |
3031.1306B | Resistor 8.2 kΩ (red) |
5. Corner connector
| ||
Order no. | Description | Material |
3050.0071 | Corner connector 90°, horizontal | EPDM |
3050.0071N | Corner connector 90°, horizontal, nitrile | Nitrile |
Other angles/colours on request |
| |
6. Corner connector
| ||
Order no. | Description | Material |
3050.0072 | Corner connector 90°, vertical | EPDM |
3050.0072N | Corner connector 90°, vertical, nitrile | Nitrile |
Other colours on request |
| |
7. Connector
| |
Order no. | Description |
3050.0061 | Straight connector for sensing strip 3100.0110I |
*Some order numbers have the additional designation “N” which means they are made of oil-resistant nitrile. Without this additional designation the material is EPDM.
Installation components
For sensing strips 3100.1610 and 3100.0804
1. Sensing strip
| ||
Order no. | Description | Material |
3100.1610 | Sensing strip 51 mm, black | EPDM |
3100.1610N | Sensing strip 51 mm, black | Nitrile |
3100.0804 | Sensing strip 51 mm with seal | EPDM |
2. End cap
| ||
Order no. | Description | Material |
3050.1303 | End cap (130/3) | EPDM |
3050.1303N | End cap (130/3N), nitrile | Nitrile |
3. Cable with pin
| |
Order no. | Description |
3020.1300B | Connection cable, 0.35 m |
3020.1302B | Connection cable (130/02), 2 m |
3020.1305B | Connection cable (130/05), 5 m |
3020.1307B | Connection cable (130/07), 15 m |
4. Resistor with pin
| |
Order no. | Description |
3031.1306B | Resistor 8.2 kΩ (red) |
5. Corner connector
| |
Order no. | Description |
3050.0074 | Corner connector (h=51 mm) |
For sensing strips 3100.0310 and 3100.0210
6. Sensing strip
| |
Order no. | Description |
3100.0310 | Sensing strip 76 mm, black |
3100.0210 | Sensing strip 76 mm with seal |
7. End cap
| ||
Order no. | Description | Material |
3050.1303 | End cap (130/3) | EPDM |
3050.1303N | End cap (130/3N), nitrile | Nitrile |
8. Cable with pin
| |
Order no. | Description |
3020.1300B | Connection cable, 0.35 m |
3020.1302B | Connection cable (130/02), 2 m |
3020.1305B | Connection cable (130/05), 5 m |
3020.1307B | Connection cable (130/07), 15 m |
9. Resistor with pin
| |
Order no. | Description |
3031.1306B | Resistor 8.2 kΩ (red) |
10. Corner connector
| ||
Order no. | Description | Material |
3050.0073 | Corner connector (h=76 mm) | EPDM |
Mounting rail
11. Installation rail
| |
Order no. | Description |
3045.1213 | Mounting rail (112/A1) Only available in 2000, 4000 mm etc. |
3045.1212 | Mounting rail (112/A) Only available in 2000, 4000 mm etc. |
12. Installation rail
| |
Order no. | Description |
3045.1214 | Mounting rail (112/A2) Only available in 2000, 4000 mm etc. |
13. Installation rail
| |
Order no. | Description |
3045.1215 | Mounting rail (112/A3) Only available in 2000, 4000 mm etc. |
*Some order numbers have the additional designation “N” which means they are made of oil-resistant nitrile. Without this additional designation the material is EPDM
Precise, Durable Linear Measurement from Kübler
Browse our range of Kübler draw wire encoders and linear measurement systems, designed for accurate position and speed sensing in industrial and OEM applications. Built for tough environments. Trusted by automation professionals.
In complex, high-stakes electrical environments, precision, safety, and performance aren't optional, they're essential. That’s why at Demesne Electrical, we supply solutions that go beyond compliance, empowering engineers and panel builders to build smarter, more connected systems.
One of our most trusted partners in this space is TELE Haase, an industry leader in intelligent monitoring and automation components. From load protection…
A few pictures from our recent team day (& night!) in Dublin City. A great day where we welcomed some of the OEM Sweden team also.
…
Discover Klauke’s latest crimping innovations – the Micro Allrounder and i-press series. Compact, powerful, and built for real-world jobs, these tools are changing the way electricians and panel builders work.
PCE industrial plugs and sockets stand out for their Austrian-made quality, fast customisation, and broad product range. With ISO 9001:2015 certification and in-house production, PCE ensures consistent performance, safety, and quick turnaround times. Their excellent price-to-performance ratio makes them a reliable, cost-effective choice for demanding industrial applications.
.png?as=1&iar=0&hash=810B0221860A0A9A4F02213200AE093A)
Elevating Safety with RCT Cable Solutions
RCT Cable Solutions are designed with safety, efficiency, and durability at their core—ensuring reliable cable management in even the most demanding industrial environments. From cable clamps to cleats, glands, and routing systems, RCT products help protect installations from strain, damage, and fire risk…
|
|
|
|
|
|
||
|---|---|---|---|---|---|---|
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
| My favourites | Articles | Height | Material | Price | |
|---|---|---|---|---|---|
Safety Edge Profile 21mm BLACK
Art:
3100.0118
Copied
|
21
|
EPDM
|
| ||
|
Safety Edge Profile 21mm BLACK NBR
Art:
3100.0118N
Copied
|
21
|
NBR
|
| ||
Safety Edge Profile 32.5mm STD
Art:
3100.0110I
Copied
|
32
|
EPDM
|
| ||
|
Safety Edge Profile 32.5mm NBR
Art:
3100.0110N
Copied
|
32
|
NBR
|
| ||
Safety Edge Profile 32.5mm RED
Art:
3100.0110RED
Copied
|
32
|
EPDM
|
| ||
Safety Edge Profile 32.5mm YELLOW
Art:
3100.0110Y
Copied
|
32
|
EPDM
|
| ||
Safety Edge Profile 51mm STD
Art:
3100.1610
Copied
|
51
|
EPDM
|
| ||
|
Safety Edge Profile 51mm NBR
Art:
3100.1610N
Copied
|
51
|
NBR
|
| ||
Safety Edge Profile 51mm STD with Lip
Art:
3100.0804
Copied
|
51
|
EPDM
|
| ||
Safety Edge Profile 68mm STD
Art:
3100.0310
Copied
|
76
|
EPDM
|
| ||
Safety Edge Profile 68mm STD with Lip
Art:
3100.0210
Copied
|
76
|
EPDM
|
|
Select a variant in the list
+35314047700
